The System 
Networked System 
Our TEMP°Tracker® Network is suitable for groups of users in different locations where local and central viewing and/or management of temperature data is necessary. The systems enable central administration of a cold chain management process that spans multiple locations.
The Point-to-Point /Multi-Point systems at each site are connected via the Internet, a Local Area Network (LAN) or a Wide Area Network (WAN) to an administration center.
Temperature measurements are automatically collected per site and archived to the administration centre periodically.
Network System Features:
- Administration centre can monitor temperature readings and alarms of any logger connected to the network
- Administration center can reconfigure any logger connected to the network
- Authorized users can monitor temperature and alarms of any logger connected to the network from a remote PC with internet access
- Detailed graphs and reports can be viewed or generated by specifying the logger and sensor identity.
Logger Features
- 4-line LCD display.
- Measures temperature from -55oC to 125oC.
- Pre-calibrated digital sensors:
> (standard) +/- 0.5oC accuracy
> (enhanced) +/- 0.2oC accuracy - Supports 1 to 4 external sensors.
- Unique alarm handling capabilities with the ability to configure upper/lower alarm limits. Each time the alarm limits are exceeded, the logger will provide the time stamp of the alarm, the alarm duration, the min/max temperature, and temperature profile during the alarm condition.
- User friendly menu system for on screen reading of temperature logs, alarm logs and configuration.
- User selectable logging interval, alarm delay interval and out of range logging interval.
- Optional auto dialer that can call pre-programmed phone numbers for remote alarm monitoring.
- Mains powered with battery back-up for continuous operation.
- Flashing alarm indicator.
PC Application Features
- Easy to use software. No training required.
- Real time display of temperature readings on PC
- Graphical display of temperature readings on PC
- Simplified alarm tracking by viewing alarm list
- Ability to determine alarm duration, min./max. temperature and temperature profile for alarms
- Ability to display daily/weekly/monthly temperature readings
- Ability to add notes and comments to temperature readings and alarms
- Statistics for min., max., average temperature
- Ability to display data in table form eg, date, time, temperature readings, comments
- Single click of mouse to perform data back-up and removal of redundant data
- Send graph or report via email at the click of the mouse
- A floor plan tool assists the user in monitoring their overall temperature monitoring system with graphical representation of the location of all sensors and status information for each sensor
Configuration Capability
Features and Sample Reports
